This is a quick overview of the essential steps when fitting an NTI-tss. For a safe and correct fitting please refer to and follow the detailed instructions for use shipped with every kit of NTI-tss.

For your convenience we have also added a short video sequence showing the fabrication of the NTI-tss.

1.Check passive fit of the NTI-matrix over the central incisors.	2.Make sure the discluding element makes exclusive contact with the opposing incisors.	3.Take approx. 10 ml of thermoplastic material
4.Heat the material in a hot water bath	5.Wait until the material gets transparent and reaches a homogenous consistency.	6.Insert the material directly into the NTI-System.
7.Fit the NTI-System over the patient’s central incisors and position it correctly.	8.Remove the NTI-System as the material starts to get opaque, after 4 or 5 minutes.	9.Remove excess material.
10.Round sharp edges and the NTI-tss for maximum patient comfort.	11.Replace the NTI-tss over the dentral incisors and verify correct and firm fit (“clip-on effect”).	12.Make sure the NTI-tss is comfortable for the patient and correctly positioned.

Please also consult our short video sequence showing the fabrication of the NTI-tss.

In order to further facilitate the use of the NTI-tss and to make it even more economical we offer you different versions of the NTI-tss.